Step 01
Check the position of the buckle and make sure that the buckle is facing upwards, then place the entire product horizontally on the middle of tail box;
Owner's Manual
Home / Owner's Manual
Installation Guides
Step 02
Unlock the buckle and unfold the first layer of the tonneau cover,adiust the position and make sure that the first layer of tonneau cover is close to the edge of the cab side;
Step 03
Holding the first layer's position, fold the remaining tonneau cover back to the top of the first layer;
Step 04
Release the adjusting handle on one side of the tonneau cover, then rotate and adjust the reserved height of the handle to be about the height of the groove on the tail box side;
Step 05
Move the handle close to the groove of the tail box side and clamp the groove;
Step 06
Repeat step 4 and step 5 on another side of tail box;
Step 07
Unfold the remaining tonneau cover towards tailgate and repeat steps 4-6;
Step 08
Done!
Step 01
Insert 2 adjusting hooks into each rail, then place the rails on both sides of the tail box an make sure that the ends of the rails close to the tailgate;
Step 02
Move 4 adjusting hooks to the proper positions at both ends of the tracks, then snap the U-shaped buckles of the adjusting hooks into the grooves of the tail box side;
Step 03
Use a wrench to tighten the screws on the top of the adjustment hooks;
Step 04
Place the tonneau cover horizontally on the tail box close to the edge of the cab side, the insert the connection ports on both sides of the tonneau cover into the ends of the rails;
Step 05
Place two crossbars horizontally on the tail box on proper position, then snap both ends of the crossbars into the rails;
Step 06
Unfold tonneau cover, then insert the connection ports on both sides of the tonneau cover into the ends of the rails;
Step 07
Snap the waterproof cloth on both sides of the tonneau cover into the rails;
Step 08
Done!
Tri-Fold Hard Tonneau Cover
Roll-up Tonneau Cover
Retractable Tonneau Cover
Tonneau Cover Usage Precautions
Thank you for choosing our Tonneau Cover. To ensure safe and optimal use, please carefully read and follow the following precautions:
Proper Installation
- Follow installation instructions carefully: Make sure to follow the installation instructions included with the cover to ensure proper fit and function. Incorrect installation may lead to poor performance or damage to the cover and vehicle.
- Check installation regularly: After installation, verify that the cover is securely fastened and that all fasteners are tightened. A loose cover may cause wind noise, water leakage, or even damage to the cover and vehicle bed.
Load and Weight Limits
- Do not overload the cover: Avoid placing heavy items directly on top of the Tonneau Cover. It is designed to protect your cargo, but it is not intended to carry excessive weight. Always check the manufacturer's weight limits to avoid damaging the cover.
- Use caution with rooftop carriers: If you plan to install a rooftop carrier while using a Tonneau Cover, ensure that the carrier is properly secured and that the weight distribution does not interfere with the cover’s operation.
Securing Cargo
- Ensure cargo is properly secured: Always make sure your cargo is securely fastened in the bed of the truck before closing the cover. Unsecured items can shift during transit and may damage both the cover and the cargo.
- Avoid sharp objects: Do not place sharp or heavy objects directly against the Tonneau Cover as this may cause tears or punctures.
Avoid Direct Exposure to Harsh Conditions
- Protect the cover from extreme weather: While Tonneau Covers are designed to handle various weather conditions, prolonged exposure to extreme heat, freezing temperatures, or heavy snow can accelerate wear and tear. Whenever possible, park the vehicle in a shaded area or use a protective cover during harsh weather.
- Avoid using the cover in extreme wind: In very windy conditions, ensure that the cover is securely latched. High winds may cause the cover to become loose, potentially damaging it or the vehicle.
Locking and Securing the Cover
- Always lock the cover when not in use: If your Tonneau Cover is equipped with a locking mechanism, ensure that it is securely locked when you are not using the truck. This will help prevent unauthorized access to your cargo.
- Check lock mechanisms regularly: Periodically inspect the locks, latches, and securing mechanisms to ensure they are functioning correctly. Lubricate them if needed to maintain smooth operation.
Avoid Chemical Exposure
- Do not expose the cover to harsh chemicals: Avoid using solvents, gasoline, or harsh cleaning chemicals on the cover, as they can damage the material or finish. Always use mild soap and water for cleaning.
- Avoid contact with oil or fuel: If oil, fuel, or other automotive fluids spill on the cover, clean them off immediately to prevent long-term damage.
Regular Maintenance Checks
- Inspect the cover regularly: Regularly inspect your Tonneau Cover for any signs of wear, such as tears, cracks, or other damage. Early detection of issues can prevent more significant damage in the future.
- Tighten any loose parts: Over time, fasteners and bolts can loosen due to vibration. Check and tighten all hardware to ensure the cover is properly secured.
When Not in Use
- Roll up or store the cover carefully, Something went wrong, please try again later.
Tonneau Cover Maintenance and Care Manual
Thank you for choosing our Tonneau Cover! To ensure that your cover lasts and performs optimally, please follow the maintenance and care guidelines provided below.
General Care
- Keep the cover clean: Regular cleaning is essential to maintain the appearance and functionality of your Tonneau Cover. Use a mild soap solution and a soft cloth or sponge to clean the surface. Avoid harsh chemicals or abrasive materials that may damage the fabric or finish.
- Dry thoroughly: After cleaning, ensure the cover is completely dry before rolling it up or storing it. This helps prevent mildew and water damage.
- Check for debris: Periodically check the cover for any debris such as leaves, dirt, or branches. Remove these promptly to prevent damage and ensure proper sealing.
Weather Protection
- Protect against extreme temperatures: Although Tonneau Covers are designed to withstand a variety of weather conditions, extreme temperatures (especially prolonged exposure to direct sunlight or freezing conditions) may cause wear over time. When possible, avoid parking your vehicle in direct sunlight for extended periods, and consider using a protective cover if parking outside in harsh conditions for long durations.
- Seal maintenance: If your cover has a sealing system (such as rubber or foam seals), periodically check these seals for any signs of wear, cracks, or tears. Replace damaged seals immediately to maintain proper water resistance.
Mechanism and Hardware Care
- Inspect moving parts: If your Tonneau Cover includes any mechanical or moving components (such as hinges, locks, or latches), check them regularly for proper function. Clean and lubricate moving parts with a silicone-based lubricant to ensure smooth operation.
- Tighten bolts and fasteners: Over time, the hardware on the cover may become loose due to vibrations or regular use. Periodically check and tighten all bolts, screws, and fasteners to maintain the cover’s stability and security.
Storage and Handling
- Avoid heavy loads: While Tonneau Covers are designed to carry light loads, avoid placing heavy objects directly on the cover as this can cause stretching or permanent damage. Always ensure the cover is free from excessive weight when not in use.
- Storage: If you need to remove the cover for storage, store it in a cool, dry place. Avoid folding it too tightly or leaving it exposed to direct sunlight for extended periods.
Troubleshooting
- Cover doesn’t close properly: Check for any obstructions along the edges or between the cover and the bed. Ensure that the latch mechanism is working properly and that no debris is interfering with the seal.
- Water leaks: If water leaks under the cover, check the seals and weatherstripping for damage. Replacing damaged seals or realigning the cover may resolve the issue.
Warranty and Support
- If you have any questions regarding maintenance or require assistance, please refer to the warranty information included with your product. For further inquiries, feel free to contact our customer support team at tang@utopickup.com.
Frequently Asked Questions
lf you need further assistance, feel free to reach out to our dedicated support team for personalized help.
- How do I place an order?You can place an order through our dealer portal or by contacting your sales representative, ensuring you provide all necessary details for smooth processing.
- What support do you provide to dealers?We provide dealers with marketing materials, training, access to an online portal for order management, and dedicated support to ensure business success.
- What are the terms for becoming a dealer?To become a dealer, complete our application form and meet criteria such as minimum order quantities and sales targets.
- How can I contact customer support?Contact our customer support team via email at tang@utopickup.com or call +86-13630198970 for assistance with your order or product inquiries.
- What is the lead time for shipping?Standard shipping takes 15–20 business days, but timelines may vary depending on product availability and order size.
- Do you offer custom sizes?We provide custom-sized tonneau covers tailored to specific truck models; contact us for details on options and requirements.
- Can I open the tailgate with the tonneau cover on?Most tonneau covers allow easy tailgate access, but some may require partial unlatching or rolling back for full use.
- How do I install a tonneau cover?Installing a tonneau cover typically involves aligning it with the truck bed and securing it with clamps or bolts, but specific steps vary by model.
- What is a tonneau cover?A tonneau cover is a versatile truck bed accessory that protects cargo, enhances security, and improves fuel efficiency.
Please send your message to us
- Tel
- *Title
- *Content